MenuSearch | Country: France | Currency: EUR
Excellent
3,687 reviews at Trustpilot.3,687 reviews
Twin SSD Quick-Release Drive Caddy - ST-2223SATA €28,27
26 in stock
Add to Basket
(8 customer ratings)
More variations available Show

Nofan Twin SSD Quick-Release Drive Caddy - ST-2223SATA

This aluminium quick-release caddy can be installed in a standard 3.5 inch (floppy drive) bay and will accommodate up to two 2.5 inch SATA drives providing an easy way to swap them in and out of the system.

Features

  1. Enables up to two SSD drives to be easily swapped in and out
  2. Fits into a standard 3.5” (floppy) drive bay
  3. Supports SATA 3 (6 Gb/s) drives
  4. Supplied with two SATA cables and four installation screws
  5. Each bay can be locked for security
  6. Excellent build quality (aluminium body)
  7. LED lights indicate power and drive activity

Sometimes it’s useful to be able to easily install or remove a hard drive or SSD in a desktop PC. Rather than fiddle about with screws and cables, this useful caddy from Nofan allows one or two 2.5” drives to be put in or taken out with the push of a button. Each drive slides easily in and latches into place, with no cables or screws to worry about. The caddy fits into a standard 3.5” (floppy) bay and once installed, makes it very easy to change drives for different PC functions, or remove them for security/storage.

Please note: After installing the caddy the SATA ports need to be configured as hot-swappable in the BIOS to function correctly.

Shown being fitted into a 3.5" bay
Shown being fitted into a 3.5” bay

SpecificationsSSD Caddy
Product codeNOFAN-ST-2223SATA
Form factorAccommodates up to 2 x 2.5” SSD/HDD in a standard 3.5” drive bay
Power connectorSingle standard SATA 15-pin plug
InterfaceSATA 3 (6 Gb/s)
Cables included2 x 60cm SATA data cables
Plug & PlayYes
MaterialAluminium
ColourBlack
Dimensions (L x W x H)146 x 101 x 25mm
Weight230g
Warranty24 months
SpecificationsSSD Caddy
Product codeNOFAN-ST-2223SATA
Form factorAccommodates up to 2 x 2.5” SSD/HDD in a standard 3.5” drive bay
Power connectorSingle standard SATA 15-pin plug
InterfaceSATA 3 (6 Gb/s)
Cables included2 x 60cm SATA data cables
Plug & PlayYes
MaterialAluminium
ColourBlack
Dimensions (L x W x H)146 x 101 x 25mm
Weight230g
Warranty24 months

Top Case Accessories

Recently Viewed Products

“Excellent product and service”

“I purchased this Thermolab Trinity cpu cooler to replace the Intel cpu cooler supplied with an Intel Pentium D processor 830 3 GHz LGA775.

The problem with the Intel cooler was that it was just so noisy - it was a real pain having to listen to it all day.

Installing the Trinity was a fairly major undertakiing, because you have to take out the motherboard. That is because the Trinity has a backplate which is mounted on the underside of the motherboard and which bolts through to secure the main cooler on the cpu side of the board.

I think it would be extremely unlikely that you could install this without removing the motherboard and, in my system, an Intel D945GNT system board mounted in an Acousticase AC 6607 case, this also involved taking out the hard drives and the psu.

In all it took me over three hours to install this cooler - although how long it takes will depend a lot on your particular system and how used you are to taking it all apart.

Howeever, having made the effort, it was definitely worthwhile.

The new cooler is virtually silent and it is wonderful not to have to spend all day listening to the Intel cooler fan whining away.

Monitoring showed that the Intel cooler fan was doing about 4800 rpm against the Trinity at typically 600 rpm or so - which accounts for why it is quieter; the bigger fan rotates more slowly to move the same volume of air. And, of course, it has a much bigger radiator, which I am sure helps.

The comfort levels around the machine have now inproved dramatically.

Also, the temperature levels seem good - I wasn’t monitoring them closely before I changed coolers, but the monitororing I’m doing now suggests that they are down on what they were before.

Also, excellent technical support and service from Quiet PC.

All in all, an excellent product and well worth the effort of installing it.”

(Review via Trustpilot)