MenuSearch | Country: France | Currency: EUR
Master M200 Mid-Tower ATX Chassis
Discontinued
More variations available Show

Micronics Master M200 Mid-Tower ATX Chassis

Micronics Master M200 features three white ring LED fans, acrylic front and side panel and a fan switch allowing for the fans to be either run at full speed, half speed or totally switched off.

Features

  1. Elegant exterior with unique octagon design​
  2. Front and left panels feature full acrylic windows​​
  3. Strong and sturdy 0.6mm thick frame
  4. Three pre-installed white ring LED fans with fan switch
  5. Supports dual radiator for water cooling

Micronics’ Master M200 is their most cost effective chassis that is feature packed despite it’s lower price tag! The chassis is supplied with transparent acrylic front and side panel, three white ring 120mm LED fans and a built-in fan switch, giving you control over the chassis fans.

Acrylic Windows

The front and left hand side of the M200 feature full acrylic panels, with the latter providing an unobstructed view into the internals of the PC. Behind the front panel sits two preinstalled white ring LED fans, which give the M200 a distinctive look of quality.

Optimised Cooling

Supplied with three 120mm fans, the M200 is ready to cool any hardware thrown at it. There are also provisions for installing a further two 120mm fans on the ceiling of the chassis, if additional cooling is required. As you would expect all intake vents feature dust filters to help prevent any dust intake. This helps to keep the installed components dust free for longer.

Support for Watercooling

As well as being able to install two 120mm fans on the ceiling of the chassis, it is also possible to install a 240mm watercooling radiator, if watercooling is your prefered method of cooling. The radiator can also be installed inside the front of the chassis, providing more options for your watercooling needs.

Built-in Fan Controller

At the top of the chassis there are the usual I/O ports, which include 1x USB3.0, 1x USB2.0, headphone and mics ports. The chassis also features a 3-step fan controller that is able to control the installed chassis fans. The three speeds are full power (12V), half power (6V) and if cooling is not required you can switch the fans off.

SpecificationsMaster M200
Model NumberMaster M200
Motherboard SupportATX, Micro-ATX and mini-ITX
Drive Bays1x 5.25”, 2x 2.5” and 2x 3.5”
PSU SupportStandard ATX
PCI Slots7
Max VGA Card Length380mm
Max CPU Cooler Height165mm
Water Cooling Radiator Support240mm at front and top of chassis
External PortsPower and reset buttons, 2x USB2.0, 1x USB3.0, Headphone and Mic ports and Fan switch
MaterialsFront/left acrylic
Cooling fansFront: 2x 120mm (supplied), Rear: 1x 120mm (supplied), Top: 2x 120mm (not supplied)
Fan SpecificationsSpeed 1200(±10%) RPM, Hydraumatic bearings, Noise level 16dB(A), 53.0 CFM, White ring LED
Dimensions (H x W x D)460 x 200 x 510
Warranty24 months
EAN barcode8809436061508
SpecificationsMaster M200
Model NumberMaster M200
Motherboard SupportATX, Micro-ATX and mini-ITX
Drive Bays1x 5.25”, 2x 2.5” and 2x 3.5”
PSU SupportStandard ATX
PCI Slots7
Max VGA Card Length380mm
Max CPU Cooler Height165mm
Water Cooling Radiator Support240mm at front and top of chassis
External PortsPower and reset buttons, 2x USB2.0, 1x USB3.0, Headphone and Mic ports and Fan switch
MaterialsFront/left acrylic
Cooling fansFront: 2x 120mm (supplied), Rear: 1x 120mm (supplied), Top: 2x 120mm (not supplied)
Fan SpecificationsSpeed 1200(±10%) RPM, Hydraumatic bearings, Noise level 16dB(A), 53.0 CFM, White ring LED
Dimensions (H x W x D)460 x 200 x 510
Warranty24 months
EAN barcode8809436061508

Product Resources

Top Quiet PC Cases

Recently Viewed Products